Woodwinds

Winter Care for String Instruments: Tips to Prevent Damage

These unpredictable cold winter months can pose challenges for string instruments, often leading to issues like slipping pegs, open seams, cracks, and a diminished overall playing experience. However, there are simple steps that string players can take to mitigate these problems, primarily related to temperature and humidity. Optimal Humidity Levels for String Instruments During the winter months, the air becomes dryer due to lower temperatures and heating units in buildings. The optimal humidity range for string instruments is between 40% and 60%. In winter, humidity levels can plummet to as low as 10%, causing the contraction of wood fibers, leading to cracks, open seams, and peg slippage. To combat this, consider these solutions: Room Humidification: Keep the room where your instrument is stored humidified. There are many cost-effective humidifier options available. Maintaining a humidity level of 40-60% can help preserve your instrument’s health. Humidity Control Device: An alternative is to keep your instrument in its case and use a humidity control device. Boveda offers an excellent product called a humidity pack, which can maintain humidity at 50% within the case. Preventing Cold Weather Damage Cold temperatures can also contribute to instrument issues. It’s essential to remember that cold weather can

Read More

Basic Tuning Tips for Woodwind Instruments

We’d like to talk about the basics of tuning your woodwind instrument. While this may seem oversimplified there are some important details about the different families and the instruments within that are important to know. All brass and woodwind instruments are designed around the A440/A442 pitch and can be adjusted higher (sharper) or lower (flatter) to a certain extent. Adjusting too far either way will affect the scale of the instrument and can actually cause playing problems. On this blog we will start with the woodwinds. Flute/Piccolo-Where the head joint tenon fits into the  receiver at the top of the main body tube is where the tuning is done. You would normally start by inserting the tenon all the way in and then pulling it out about 1/8-3/16 inch to start tuning. Then you would push in more to raise the pitch or pull it out to lower. Never use the head crown assembly for general tuning. For more info about the head crown assembly see our post titled "There’s A Cork In My Flute. What Does It Do?".   Bb-Eb Clarinets-Where the barrel fits onto the top of the upper joint is where the primary tuning is done. After

Read More
Categories